How to use the resin cost calculator
- Pick your resin and enter the price of a 1 litre bottle.
- Enter the volume in ml and the print time from your slicer (Chitubox, Lychee, or your printer's own slicer), including supports and raft.
- Choose your printer to load a typical power draw, and set your electricity price.
- Add consumables per plate (IPA, gloves, film wear), your hands-on time for washing, curing and support removal, and how many parts fit on the plate.
- Pick where you sell and a margin to get the price after fees. Save a PDF quote or copy a share link.
How resin print cost is calculated
- Resin: ml ÷ 1,000 × price per litre.
- Resin waste: spills and leftovers in ml, at the same price per litre.
- Electricity: print hours × power in kW × price per kWh.
- Machine wear: print hours × printer price ÷ lifespan in hours. Resin printer screens and films wear faster, so the default lifespan is 2,000 hours.
- Consumables: your per-plate figure for IPA, gloves and film.
- Failed prints: run cost × f ÷ (1 − f) for failure rate f.
- Labour: minutes ÷ 60 × hourly rate.
Worked example
Four miniatures on one plate: 60 ml of standard resin at $30 per litre, 5 ml of waste, a 4-hour print on a 60 W printer, $0.17 per kWh, a $500 printer with a 2,000-hour life, $0.50 of consumables, a 10% failure rate, and 20 minutes of work at $15 an hour.
- Resin and waste: $1.95
- Electricity: $0.04
- Machine wear: $1.00
- Consumables: $0.50
- Failed prints: $0.39
- Labour: $5.00
- Plate total: $8.88, so $2.72 per miniature including $0.50 packaging.
Tips to lower resin printing cost
- Hollow larger models and add drain holes; it can cut resin use by more than half.
- Fill the build plate so electricity and labour are shared across more parts.
- Filter and reuse IPA, or switch to water-washable resin for small batches.
- Keep the vat and resin warm in winter to reduce failed prints.
Printing with filament instead? Use the 3D print cost calculator, which can read your G-code or 3MF file.
Resin printing cost FAQ
How much does resin 3D printing cost? +
A typical resin miniature uses 5 to 20 ml of resin. At $30 per litre, that is $0.15 to $0.60 of resin. Add IPA, gloves and film wear, electricity and failed prints, and most small resin parts cost $0.50 to $3 to make before labour.
How do I calculate resin cost per print? +
Multiply the volume your slicer reports in millilitres by the price per litre, then divide by 1,000. 45 ml of a $35 per litre resin costs 45 × 35 ÷ 1,000 = $1.58. Include supports and raft, because the slicer volume usually counts them.
Is resin printing more expensive than filament? +
Per gram, yes: resin usually costs $25 to $50 per litre against $18 to $25 per kg for PLA, and resin needs IPA, gloves and replacement film. For small, detailed parts the difference is small because they use very little material.
How much electricity does a resin printer use? +
Most desktop MSLA resin printers draw 30 to 80 W while printing, so a 4-hour print uses about 0.25 kWh, or roughly $0.04 at $0.17 per kWh. Add a little more if you run a wash and cure station.
What consumables should I include for resin prints? +
Isopropyl alcohol (or water for water-washable resin), nitrile gloves, paper towels, and wear on the FEP or release film and the screen. Many makers allow $0.30 to $1.00 per plate; enter your own figure in the Consumables field.
How much should I charge for resin prints? +
Resin prints usually take more hands-on time (washing, curing, support removal) than filament prints, so price labour honestly. Start from your full cost per item and pick a margin; miniatures and detailed custom parts often sell at a 50% to 70% margin.